Dakota Digital 1967-72 Chevy Truck RTX Series Digital Gauges

Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.

You can control both daytime and nighttime brightness through the setup menu. The day vs. night mode is determined by the headlight switch. When the headlights are on, the gauge brightness will switch to night mode. If you want to be able to control the brightness on the fly, the DIM-1 is a very popular accessory that allows you to adjust the brightness similar to most new cars.

There are twelve factory preset color themes that allow you to quickly get to some of the most popular combinations. But, if you want to, you can completely customize each color zone yourself for your own personal theme.

The LED backlighting delivers sharp contrast for easy viewing regardless of the time of day. With full RGB LEDs, you can create the specific color you want. You can set it to warm white for an OEM look or completely customize it to match your vehicle, your favorite team, or whatever you're feeling at that time.

Dakota Digital instrument systems are programmed and operated by the push of a button. A two-sided rocker switch is included with each package; mount this switch in an easily accessible location when in the driving position. The rocker switch provide quick and consistent access to all functions, either in driving mode or while in the setup menu. Button-press feedback is available through the TFT Message Center, or through the included buzzer. Once configured, this same switch is used to access the wealth of information located in the digital message centers.

RTX instrument systems can also be completely configured through the available mobile app, suitable to Android and Apple devices. Using your existing tablet or smart phone, download the free app, sync your device to the RTX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display.

All calibration settings are handled through the included pushbutton switch or the remote Bluetooth app. While many calibration settings exist, the speedometer and fuel level are completed in most cases (unless GPS-50-2 is used, negating the need to calibrate the speedometer) through a few taps of the pushbuttons and a short test drive of the vehicle.

Dakota Digital guagues include the required sensors for oil pressure, water temperatures, and the speedometer. You may not need any additional parts, but consider these below:

All Instrument packages contain a gear shift indicator display allowing the transmission gear position (Park, Reverse, etc.) to be shown within the message center. The GSS-3000 accommodates automatic transmissions with 2- 4 forward gears and enjoys a simple and straightforward installation.

Although Dakota Digital instrument systems are programmable for both day and night intensity levels, the DIM-1 will allow rotary, or on-the-fly brightness adjustment added convenience.

Dakota Digital instrument systems are designed to utilize a stock or aftermarket fuel level sensor. If a universal or replacement sensor is desired, the SEN-06-1 is a great choice.

The BIM-01-2 OBD-II (J1850/CAN) Interface connects directly to the ECM diagnostic port to extract engine and transmission data and supply it to the VFD/ VHX/ HDX/ RTX instrument, making installation a breeze.

The Dakota Digital BIM-17-2 makes it easy to add compass and outside air temperature information to your VFD/ VHX/HDX/ RTX instrument system. Readouts are visible in the instrument system's message centers; sending units and mounting hardware included.

• Apple iOS
• Android