Free Shipping*
Lower 48. Orders over $100.
2 Year Warranty
On all our radios.
Your cart is currently empty.
| CEA-2006 Compliant | 75W x 1 @ 4Ω ≤1.0% THD+N |
| Number of Channels | 1 |
| Rated Power (RMS Continuous Power) | 75 Watts x 1 @ 4-Ohm 150 Watts x 1 @ 2-Ohm 300 Watts x 1 @ 1-Ohm |
| Total Power (Sum of Rated Power) | 300 Watts |
| Dynamic Power (PVC/PowerCube®) | 96 Watts x 1 @ 4-Ohm 189 Watts x 1 @ 2-Ohm 326 Watts x 1 @ 1-Ohm |
| Bridgeable | No |
| Frequency Response | 20Hz - 250Hz +/-3dB |
| Efficiency (average) | 75% @ 4-Ohm 75% @ 2-Ohm 75% @ 1-Ohm |
| Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Crossover Controls | Low-Pass: 35Hz - 250Hz @ 12dB/Octave Butterworth |
| Tone Controls | External via Optional Punch EQ |
| Input Sensitivity | Low-Level: 150 mV - 4 V High-Level: 400 mV - 11 V |
| Signal Input | High/Low Input Switch High/Low Level Input: 4-Pin harness Hi-Level Sensitivity: Variable DC offset sensitivity |
| Signal Output | - |
| Power Input Connector | Detachable Compression Terminal |
| Power Wire Gauge | 10 AWG |
| Speaker Output Connector | 4-Pin Harness Wiring Convenience: 2 Negative Terminals (-) / 2 Positive Terminals (+) |
| Speaker Wire Gauge | 16 AWG |
| Heat Sink Type | Extruded aluminum |
| Cooling | Convection |
| Remote Controls | Optional PEQ provides 0dB to +18dB @ 45Hz |
| Visual Indicators | Power/Protect, BRT (Boost) |
| Circuit Topology Class | Class-BR |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse (not included) | 30 A |
| Max. Current Draw (13.8V Sinewave) | 30 A |
| Average Current Draw (13.8V Music) | 15 A |
| Suggested Alternator | 75 A |
| Shipping Weight | 2.76 Lbs. (1.25 Kg.) |
| Dimensions (H x W x D) | 1.53 x 4.25 x 6.75 (in.) 3.90 x 10.8 x 17.2 (cm) |
| Dimensional Diagram | ![]() |
Copyright © 2025 ClassicCarStereos.com