Kicker 1958 Impala Kick Panel Speakers Pair

Kicker Kick Panel Speakers for 1958 Chevrolet Impala with 4x6" Speakers

The Kicker 1958 Chevrolet Impala kick panel speakers mount just like your stock kick panels with 4x6" speakers mounted in them. Our Kicker 1958 Chevrolet Impala kick panel speakers are made of high quality ABS plastic that comes in a black textured finish but the surface is paintable so that you can match the color of your vehicle's interior. We our proud to feature Kicker speakers in the 1958 Chevrolet Impala kick panels as we have found that they have the best sounding speakers that meet the mounting depth requirements of the kick panels while still producing a high quality sound that we feel is a true upgrade, not just paying for a name on a speaker grille.

Kicker CS or Kicker KS Speakers

We offer two series of Kicker 4x6" speakers and both of them fit in the kick panel opening and have a low-profile mounting depth so that you can actually mount the kick panel.

The Kicker CS series are great OEM or stock speaker upgrades. The Kicker CS speakers are a higher quality, better sounding speaker than the speakers that come in new cars today, even those with premium or upgraded sound systems. The Kicker CS series speakers are extremely efficient and work very well powered by your radio or an amplifier.

The Kicker KS series is the top of line speaker from Kicker and they feature silk dome tweeters for very smooth, warm and balanced sound. The KS speakers are not as loud as the CS when powered with the radio but offer a different type of sound that is warmer and balanced, comparable to most home theater speakers. When amplified, the Kicker KS speakers will play louder than the CS series and have better bass response while still offering that high quality, rich warm sound that comes from the silk dome tweeters. Please be aware that the KS speaker grilles protrude out a little further that the CS and may require you to move the e-brake mounting bracket over for enough clearance.

Add Hushmat for Better Sound

Add HushMat Wave Breaker pads for even better sound. The HushMat Wave Breakers simply stick to the body behind the kick panel speakers and eliminate backwave distortion so that you hear 30-40% more of the music that your speakers are producing. The Wave Breakers will give the effect of a sealed enclosure despite an open-air installation. The HushMat Wave Breaker pads come with peel and stick adhesive and require no special tools for simple, easy installation.

Kicker CS Series 4" x 6" Speakers

Peak Power Handling

150 Watts

Recommended Amplifier Power

50 Watts RMS

Frequency Response

50Hz - 20kHz

Impedance

3.3 Ohms (DC Resistance)

Sensitivity

88dB @ 1W/1m

Speaker Design

2-Way Speaker

Woofer Size

4" x 6" (100mm x 160mm)

Tweeter Size

1/2" (13mm)

Tweeter Design

Balanced Dome

Tweeter Dome Material

PEI (Polyetherimide)

Tweeter Magnet Material

Neodymium

Tweeter Protrusion

0

Woofer Cone Material

Polypropylene

Woofer Surround Material

Polyester Foam

Mounting Hole Dimensions

4" x 6" (101mm x 152mm)

Top Mount Depth

1 11/16" (43mm)

Bottom Mount Depth

2" (50mm)

Kicker KS Series 4" x 6" Speakers

Peak Power Handling

—

Recommended Amplifier Power

15-75 Watts RMS

Frequency Response

50Hz - 20kHz

Impedance

4 Ohms (Rated)

Sensitivity

88dB @ 1W/1m

Speaker Design

2-Way Speaker

Woofer Size

4" x 6" (100mm x 160mm)

Tweeter Size

1/2" (13mm)

Tweeter Design

—

Tweeter Dome Material

Silk

Tweeter Magnet Material

Neodymium

Tweeter Protrusion

0" (1mm)

Woofer Cone Material

Polypropylene

Woofer Surround Material

Rubber

Mounting Hole Dimensions

4" x 5 5/16" (101mm x 151mm)

Top Mount Depth

1 11/16" (44mm)

Bottom Mount Depth

2" (51mm)

California Prop 65 Warning:

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov