JL Audio RD900/5 900 Watt 5 Channel Amplifier
The JL Audio RD900/5 is a perfect amplifier for powering 4 speakers and 1 or 2 subwoofers. The RD900/5 puts out 75 watts of RMS power at 4 ohms and 100 watts at 2 ohms making it a perfect match for most quality car speakers. In addition to the full-range output, the RD900/5 also puts out 500 watts of constant power for one or two subwoofers, giving you a single amp to power your whole system without needing distribution blocks or unncessary wire. This amp uses JL's NexD switching technology to deliver clean power with incredible efficiency and low distortion.
The RD900/5 comes in a stylish, black finish with control on the top of the amplifier underneath the protective cover. This amp has 12dB/octave crossovers and high, low, and all pas filters. You have the option of running both high or low level inputs, the amp features automatic turn-on capability and has a selectable 2, 4, or 6 channel input switch for the maximum installation flexibility.
One of the unique features of the JL RD amplifiers is the LED clipping indicator. When you play test tunes, the amplifier will light up to first tell you when you get a clipped signal from your radio or head unit. This tells the volume level which you should never exceed. Once you know where your radio clips, you turn the gain up on the amplifier until you see the LED light up again. You turn the gain back slightly to make the light stop illuminating and you have gains perfectly set. This takes the guesswork out of the equation and ensures maximum power output without disotrtion and clipped signals.
Other Items You May Need:
- 4 AWG Amp Wiring Kit
- RCA Cables
- Speaker Wire
- JL Audio C2 Speakers
- JL Audio Subwoofers