JL Audio 10W1v3-2 10 Inch W1v3 Subwoofer 2 Ohm

The JL Audio 10W1v3-2 is a 10 inch subwoofer with a 2 ohm voice coil and offers improved construction and better materials than the W0 line. The W1s have a Mica-filled polypropylene cone, rubber surround, and they are available in both 2 ohm and 4 ohm voice coils. This 10" subwoofer combines JL Audio's hard-hitting bass, affordability, and long term durability, all into one compact, yet impressive, package.

The 10W1v3-2 is designed to work in a sealed enclosure. It features a shallow mounting depth of 4.6" while delivering full-sized output. The compact motor structure, allows it to comfortably fit in a lot of spaces where a typical 10-inch driver will not.

The 10W1v3-4 10" subwoofer is optimized to operate in a compact 0.550 cu. ft. sealed enclosure or a 0.9 cu. ft. ported enclosure.

We recommend this 2 ohm version for single subwoofer applications to maximize the output of your amplifier to a 2 ohm load. You can also use a pair of these subwoofers if you have an amplifier that is 1 ohm stable, but JL does not make a 1 ohm stable amplifier to power the 10W1v3-2. If you are looking for a pair of 10W1 subs, we recommend the 4-ohm version, 10W1v3-4. You can wire the two 4 ohm subwoofers in parallel to a 2 ohm load. If you are powering a single subwoofer, we like the JD250/1, XD300/1v2, RD500/1, and the JD500/1. If you opt for one of the 500 watt amplifiers, be sure that you don't turn the gain up all the way. You don't want to over heat and warp the voice coil with too much power.