JL Audio CS110TG-TW3 10 Inch TW3 PowerWedge Loaded Subwoofer Enclosure 2 Ohm
The JL Audio CS110TG-TW3 loaded enclosure comes with one, JL Audio TW3 inch subwoofer pre-installed, wired, and terminated to a 5-way binding post terminal. The JL Audio loaded enclosures allow you to quickly and easily add a JL sub to your vehicle. Simply connect the speaker wires from yoru amplifier and you have clean, hard-hitting bass
The 10 inch TW3 subwoofer is one of the few low profile subwoofers that delivers the performance of a full size subwoofer while taking up significantly less space. The 10 inch TW3 can handle 400 watts RMS and is wired to a 2 ohm load. In addition, the subwoofer grille is included to protect the sub.
In addition to the ease of installion, the subwoofer box for CS110TG-TW3 provides the optimal air space for the subwoofer and has been optimized and tuned by the same engineers that designed the subwoofer. You don't have to worry about air space calculations, air leaks, wiring, or the finishes. Instead, you have the ideal enclosure as a finished product, ready to rock.
There are two versions of the 10" TW3 loaded enclosures with the CS110TG-TW3 and the CS110LG-TW3. This one the TG, is a truck box that is designed to fit behind the seat of a single cab truck. Of course, you can use this in other applications but the main difference is the width and the depth when compared to the LG version. The CS110TG-TW3 is narrower, but deeper at the bottom with an angled design while the LG is wider, but thinner, and has the same depth at the top and the bottom. Both provide the proper volume and deliver the same performance, it just depends on which form factor will work best for your install.