The Holley EFI Interface Module from Dakota Digital reads engine information from the following kits:
• Holley Terminator (including X and X Max)
• Dominator EFI
This module uses the supplied 2 or 4 pin harness for a simple direct plug in connection to the Holley EFI system
Collects and outputs the following information to compatible Dakota Digital Instrument Systems*:
• Engine Coolant Temperature
• Intake/Manifold Temperature
• Fuel Pressure
• Air/Fuel Ratio
Note: Various factory and modified ECM’s may make additional data add-on’s available, such as Vehicle Speed, Oil Pressure, and Boost. Coolant temperature, intake temperature, fuel pressure, and air/fuel ratio displays are functions of the ECM and matching OEM functional sensors, and as such we cannot guarantee the presence or accuracy of these readings.
*The Holley EFI Interface Module decodes information provided by the Holley Terminator (X and X MAX with BIM-01-2-HLLY produced after 6/13/2019), Sniper (Sniper with BIM-01-2-HLLY produced after 2/1/2018) HP and Dominator EFI's and supplies it to the VFD3 rev. G, VHX, RTX and HDX control box instrument systems ONLY.
Compatible with Dakota Digital instrument systems VHX, HDX, RTX, and VFD3 with black plastic control modules. BIM-compatible control boxes utilizing a 3.5mm headphone jack BIM input will require a 3.5mm male connector to 4-pin male connector (394193). Earlier instrument systems utilizing aluminum control modules are not capable of BIM connectivity.